Please wait...

SPY CENTER

Central system comparison >

Spy Center's advanced technology is the result of collaboration with a European company which has been active in the emergency lighting sector for more than 20 years, with over 2.000 systems already installed.

 

STRONG POINTS

  • No inverter to convert direct current into alternating current
  • Electrical energy and bus travel on the same wires (dedicated)
  • Maximum flexibility in the dimensioning of the necessary power output
  • Dedicated contactor for emergency lighting
  • Expansive system modularity for system and power type
  • Batteries with a 10-year life declaration
  • Possibility to customize the cabinets to specific measures
  • Station with matrix display and buttons for the programming
  • Complete programming flexibility for functioning type: M, N/M and AI via configuration software
  • Remote management via web
  • In cases of standard functioning the output is powered in by-pass by the normal electrical network (230Vac)
  • In emergency situations the output is powered by the direct voltage of the nominal 216Vdc battery group
  • No inverter is present between the batteries and the output
  • Easy system connection: simple, safe, strong and reliable communication together with power conductors

 

 MIXED-MODE TECHNOLOGY

  • Possibility of installing luminaires types Non-Maintained (N/M), Maintained (M) and Lit with Switch (AI) on the same line (only with Control system)
  • The system communicates the status of the tests and the system programming with the same wires with which it provides electrical energy
  • Reduction in the costs of materials and installation

 

ENHANCED CAPABILITIES OF THE SYSTEM

  • Up to 2.560 products controllable via MDL-L
  • Up to 128 650 W lines protected against short circuits
  • Wide range of power from 500 W to more than 80 KW
  • Boards and accessories for fire resistance
  • Possibility to remote control the power lines directly on the floor and/or fire-proof compartment via theSCML module (4 lines for 20 products per line)
  • Unique module for the management of programmable products (like N/M, M or IA) directly from the software after the system is connected
  • Log book, periodic controls register for quick viewing of the event log
  • Test for the monitoring of the isolation between battery potential and earth
  • The functionality and duration tests are freely programmable

 

BATTERY LOG

The battery Log is a system developed for the monitoring of lead sealed batteries present inside Spy Center central battery system.
The system consists of transmitter modules connected to each battery and a module mounted on the Spy Center mimic panel. Both the transmitter module and the receiver module have a LED for signaling the operating status of each single unit.

Battery Log

Green LED on steady
The battery is in good condition and its operating voltage is correct
Green LED on steady + red LED flashing slow
The battery voltage is below the normal operating threshold and may unbalance the entire battery pack.
Green LED on steady + red LED flashing fast
The battery voltage is above the normal operating threshold and may unbalance the entire battery pack resulting in overheating and consequent damage to the battery
Flashing green and red LEDS
The temperature inside the box is above operating threshold (over 38°C)

 

General data
  • System compliant to european norms:
    EN 50171
    EN 50272-2
    EN 62034
  • Time intervals between verification tests comply to european norms:
    EN 50172
    UNI 11222
ACCESSORIES
ACCESSORIES
  • SCBAT-RX-SC - BATTERY MONITORING SYSTEM SPY CENTER RECEIVER
  • SCBAT-TX - BATTERY MONITORING SYSTEM TRANSMITTER
  • SCCTRL - INTEGRATED CIRCUIT BOARD
  • SCFRDB - FIREPROOF BRANCH BOX E30
  • SCLAN - INTEGRATED CIRCUIT BOARD LAN CONNECTION
  • SCMDL-L - MODULE FOR MONITORING INDIVIDUAL EMERGENCY LAMP L
  • SCMF - EXT. MODULE FOR 7-PHASE MONITORING
  • SCMF2-S - EXT. MODULE FOR MONITORING OF THE 1 CHANGE OVER CONT.PHASE
  • SCML - EXTERNAL MODULE FOR LINE MONITORING
  • SCNDB1 - E30 FOR EXTERNAL MODULE 125X125X60
  • SCNDB2 - E30 FOR EXTERNAL MODULE 170X145X70
  • SCNDB3 - E30 FOR EXTERNAL MODULE 243X168X83
  • SCPRINTER - THERMAL PRINTER FOR SPY CENTER
  • SCPSR - SYNOPTIC REMOTE PANEL 166X161X71
  • SCTRASFERTA - INTERNATIONAL TRAVEL FOR SYSTEM START-UP
  • SCTRASFERTA1 - INTERNATIONAL TRAVEL WITH 1 NIGHT FOR SYSTEM START-UP
  • SS-ATTIVA4 - 4H CENTRAL START-UP SERVICE
  • SS-ATTIVA8 - 8H CENTRAL START-UP SERVICE